Package Contents
Hardware Installation
Operation
TM
· Before beginning the installation procedure, ensure that all equipment to
be connected is powered oꢀ.
1 SY-KVM20050 USB KVM Switch with Attached Cables
1 User Guide
Hotkey Port Selection
All hotkey port switches begin with tapping the Crtl key twice.
[Crtl] [Crtl]
· Unplug power cords of any computers that have the ‘Keyboard Power On’
function. Otherwise, the switch will receive power from the computer
Hardware Requirements
Invokes Auto Scan Mode
· To prevent damage to your equipment, make sure that all the devices are
properly grounded
Console · A VGA, SVGA, or Multisync monitor
· A USB Keyboard
Starts Auto Scan. Press and release the [Left shift] key, and then press the
[Right shift] key.
[Left shift] [Right shift]
Installing your new SY-KVM20050 involves the following steps:
· A USB Mouse
Cancel Auto Scan Mode
Press and release the [ESC] or [Space] key
Scan Interval
Computers
The following equipment must be installed on each computer that is to be connected
to the system:
Sets the Auto Scan interval to n second intervals - where n is a number from
1 – 4.
[Left shift] [Right shift] [n]
· A VGA, SVGA or Multisync video port
· A USB Type A port
Hardware Review
Note: The n stands for the number of seconds that the focus dwells
on a port before switching to the other one. Replace the n with a
number between 1 and 4 when entering this hotkey combination.
(See the table, below.)
1. Plug your keyboard, monitor, and mouse into their ports on the SY-KVM20050. The
keyboard and mouse ports are labeled with an icon to distinguish them.
Scan Interval Table
Note: When using a wireless composite keyboard and mouse, its
USB cable must plug into the SY-KVM20050 keyboard port for the
Hotkeys to function.
n
1
2
3
4
Secs.
3 secs.
5 secs.(Default)
10 secs.
2 Port USB Cable KVM Switch
SY-KVM20050
20 secs.
2. Plug your speakers into the SY-KVM20050’s speaker jack.
Note: This step is optional
User Guide
3. Plug the USB, video, and speaker connectors of the attached KVM cables into their
respective ports on the computers you are installing.
1. Port LEDs
2. KVM Cables
3. Console Ports
4. Turn on the power to the computers.
Specifications and products are subject to
change without prior notice
4. Speaker Jack
5. USB keyboard/Mouse connector
6. Video Connector
7. Speaker Plug
Note: The SY-KVM20050’s Power On default is to link to the ꢁrst
computer you turn on.
All trade name referenced are the registered
trademark of their respective owners
Made in China
Hotkey Conꢀguration
Invoking Hotkey Mode [Ctrl] + [F12] . There are 3 Steps:
1. Press and hold down the [Ctrl]
Keyboard Emulation Mapping
Specifications
The USB 101/104 key keyboard can emulate the functions of the Sun or Mac
keyboard. The corresponding functions are shown in the table below.
Mac Keyboard
Function
SY-KVM20050
Note: When using key combinations, press and release the ꢁrst key, then press
and release the second key.
Computer Connections
Port Selection
2
Sun Keyboard
2. Press and release [12]
3. Release the [Ctrl]
Hotkey
Keyboard
Video
1 x USB Type A Female (Black)
1 x HDB-15 Female (Blue)
1 x USB Type A Female (Black)
1 x Mini Stereo Jack Female (Green)
Note: When using [Ctrl] combinations, press and release the Ctrl key, then
press and release the activation key.
Console
Ports
After invoking Hotkey Mode, key in one of the following keys to perform the
corresponding function:
Mouse
PC Keyboard
[Shift]
Mac Keyboard
Speaker
Sun Keyboard
Stop
PC Keyboard
[Ctrl] [T]
Key
F1
Function
Connectors
Shift
Ctrl
Keyboard/ Mouse
2 x USB Type A Male (Black)
2 x HDB-15 Male (Blue)
Sets the PC Compatible keyboard operating platform.
Sets the Mac keyboard operating platform.
Sets the Sun keyboard operating platform.
[Ctrl]
KVM
Ports
Video
[Ctrl] [F2]
[Ctrl] [F3]
[Ctrl] [F4]
[Ctrl] [F5]
[Ctrl] [F6]
[Ctrl] [F7]
[Ctrl] [F8]
[Ctrl] [F9]
[Ctrl] [F10]
Again
Props
Undo
F2
[Win]
Speaker
2 x Mini Stereo Plug Male (Green)
2 (Green)
F3
[ESC] or
[Space]
[Ctrl] [1]
[Ctrl] [2]
[Ctrl] [3]
LEDs
Selected
Cancel operation platform setting
Cable
Length
Computers
4 ft (1.2 m)
Front
R [Enter] Resets the Hotkey settings to their default status.
Emulation
Video
Keyboard/ Mouse
USB
Copy
2048 x 1536; DDC2B
5 Seconds
[Ctrl] [4]
[Alt]
Open
Paste
Find
Scan Interval
L Alt/Option
F13
Operating Temp.
Storage Temp.
Humidity
32 ~ 122°F (0 ~ 50°C)
-4 ~ 140°F (-20 ~ 60°C)
0-80% RH, Non-condensing
Plastic
Environment
[Prt_Sc]
[Scroll Lock]
[Desktop Menu]
[Enter]
Troubleshooting
F14
Housing
Cut
Symptom
Possible Cause
Action
=
Physical
Weight
0.86 lb (0.39 kg)
Keyboard
and/or
Mouse Not
Responding
Keyboard / Mouse
needs to be reset.
Hotkey sequence
input incorrectly.
Unplug the keyboard / mouse from the Console
Keyboard Port, then plug it back in.
[Ctrl] [1]
[Ctrl] [2]
[Ctrl] [3]
Properties
Dimensions
(L x W x H)
3.11 x 2.60 x 1.02 in
(7.90 x 6.60 x 2.60 cm)
Return
Delete
Help
[Back Space]
[Ins]
Resend the Hotkey command - press and
release each key in the sequence individually.
Switch needs to be
reset.
Turn off the computers; wait 5 seconds; turn the
computers back on.
[Ctrl] [Win]
F15
[Ctrl] [4]
[Ctrl] [H]
Video
Resolution and/or
Problems
Refresh rate set too Select a lower resolution and/or bandwidth.
high.
Help
|